Accessing Setup Options; About The Control Panel Setup Interface - EFI KM-C1530 Configuration Manual

4
4-3 Fiery X3e Control Panel

Accessing Setup options

T S
O ACCESS ETUP WHEN THE
1. Make sure the information screen on the Control Panel reads Ready.
If Printing or RIPping appears, the Fiery X3e is processing, and you must wait
until the system finishes and reaches the Idle state.
2. Press the Utility button on the Control Panel.
3. In the Touch Panel, press the Controller Detail button.
4. Press the Menu button.
5. Use the down arrow button to scroll to Run Setup.
At the main Setup window, press the button for the Setup you want to access.
For first-time Setup, you must perform at least these Setups in this order: Server
Setup, Network Setup, and Printer Setup. After performing these Setups, you can
continue with the remaining Setups, or exit Setup and save your changes.

About the Control Panel Setup interface

When you perform Setup from the Control Panel, you can select one menu after
another and enter information about your Fiery X3e and your network and printing
environment.
In each Setup screen, the last line of the display window shows the name of the current
Setup menu.
F X3 R
IERY E IS EADY