EFI KM-C1530 Configuration Manual page 90

4
4-36 Performing Setup from the Control Panel
Publish Direct Connection
Yes/No [Yes]
This option allows users to print (or download) jobs to the Fiery X3e without
spooling. Jobs printed to the Direct connection are not saved in the Printed queue.
If you plan to download fonts to the Fiery X3e, you must publish the Direct
connection.
Publish Print Queue
Yes/No [Yes]
This option allows users to print (or download) jobs to the Print queue. Jobs that are
printed to the Print queue are spooled to the Fiery X3e disk and printed on a first-in,
first-out basis. Only queues published in the Printer Setup are available to users.
To print to the Fiery X3e over the parallel port, you must publish a queue or
N :
OTE
publish the Direct connection.
Publish Hold Queue
Yes/No [Yes]
Use this option to allow users to print (or download) jobs to the Hold queue. Jobs in
the Hold queue can only be printed by copying or moving the jobs to the Print queue
with the job management tools.
Personality
Auto/PCL/PostScript [Auto]
In PCL or PostScript mode, the Fiery X3e is restricted to PCL or PostScript jobs,
respectively. Jobs sent to the Fiery X3e that do not match the personality selected on
the Fiery X3e are not printed. In Auto mode, the Fiery X3e switches to the appropriate
page description language for each job.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Printer Setup; select No to return to the
main Setup menu without making any changes.