EFI KM-C1530 Configuration Manual page 130

5
5-26 Setting up the Fiery X3e from a Windows Computer
—If you have already enabled IP Auto in Protocol Setup, and selected either
Auto IP
DHCP or BOOTP as the protocol for obtaining an IP address, select this option to
allow the Fiery X3e to obtain the IP address automatically for the WINS Name Server.
If you do not select this option, use the following two options to specify whether to use
a WINS Name Server and its IP address.
Use WINS Server
cannot be routed beyond their original network segment without a WINS name
server. Setting up the WINS name server is outside the scope of this manual. To find
out if a name server is available, contact your network administrator.
—Enter the IP address of the WINS name server.
IP Address
HTTP Connection Support (WWW)
Enable Web Services
TCP/IP must already be enabled on the Fiery X3e and on users' computers. The
WebTools include WebSpooler, Status, WebLink, WebSetup, WebDownloader,
WebScan, and Installer. A Java-enabled Web browser and a valid IP address are
required for each user. For details on supported browsers and workstation
requirements, see the
Enable Internet Printing Protocol (IPP)
You must enable Web Services. For information on setting up users' computers to use
IPP printing, see the
—Select to use a WINS name server. Broadcasts from SMB devices
—Select to make the WebTools available to users (see
User Software Installation
—Select Yes to enable printing with the IPP.
User Software Installation
Guide.
Guide.
page 6-2).