EFI KM-C1530 Configuration Manual page 60

4
4-6 Performing Setup from the Control Panel
No Account Printing
Disable/Enable [Disable]
Specify whether to enable account printing.
Enable Printed Queue
Yes/No [Yes]
Specify whether to enable the Printed queue, which creates a storage location on
the Fiery X3e disk for recent jobs that were printed from the Print queue. Users with
Administrator or Operator access to the job management tools can reprint jobs from
the Printed queue without resending them to the Fiery X3e. If you select No, jobs are
deleted from the Fiery X3e disk immediately after they are printed.
Jobs Saved in Printed Queue
1-99 [10]
This option appears only if Enable Printed Queue is set to Yes. Specify the number of
jobs to be stored in the Printed queue. Jobs in the Printed queue take up space on the
Fiery X3e hard disk. If disk space is low, use a smaller value for saved jobs.
Clear Each Scan Job
After 1 day/Now/Manually/After 1 week [After 1 day]
Specify how you want to remove scanned data from the hard disk. If you select
Manually, the scanned data remains on the hard disk until specifically deleted, or until
all scanned jobs are cleared by the Administrator.
Enable Mailbox Passwords
Yes/No [Yes]
Select Yes to allow users to access mailboxes with passwords.
Save Changes
Yes/No [Yes]
Select Yes to activate any changes made in the Server Setup; select No to return to the
main Setup menu without making any changes.