EFI KM-C1530 Configuration Manual page 36

2
2-12 Setting up Network Servers
Setting up a NetWare print queue for bindery
For NetWare 4.x in emulation mode, the NetWare print server and print queue for
the Fiery X3e are created and configured from NetWare Print Console (PCONSOLE),
a NetWare utility that is stored in the NetWare PUBLIC directory.
As with NDS, you can create several NetWare entities on a Novell server, and then you
can select them in Network Setup (see
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, perform Network Setup (see
page 4-7), and verify that the settings reflect the entities you created in the NetWare
administrator utilities (see
For printing to the Fiery X3e, connect all Windows clients to a NetWare server
N :
OTE
and permit them to connect to the Netware print server or servers on which you
defined a NetWare print queue for the Fiery X3e.
After the Novell server and the Fiery X3e have been set up, client setup consists of:
• Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 9x/Me workstations, loading both the IPX/SPX-compatible protocol
and the Client for NetWare Networks from the Network Control Panel.
On Windows NT 4.0/2000/XP workstations, installing Client Services for
NetWare. Use the CSNW option in the Control Panel to set printing options and
specify a preferred NetWare server.
• Setting up the Fiery X3e as a PostScript printer by installing a PostScript printer
driver and the Fiery X3e PPD (PostScript printer description).
• Adding a network port and connecting the workstation to one or more NetWare
queues that have been defined for the Fiery X3e.
• Installing Fiery X3e software.
For details, see the
page 4-17).
page 2-9).
User Software Installation Guide.