Clearing The Fiery X3E - EFI KM-C1530 Configuration Manual

7

7-5 Clearing the Fiery X3e

T
O SET OR CHANGE A PASSWORD
1. Select the password you want to change.
2. Type the password in both the Enter New Password and Verify New Password fields.
Passwords are case-sensitive and can be any combination of letters and numbers up to
19 characters. You must enter the password exactly the same way both times. The new
password remains in effect until you change it.
T
O REMOVE A PASSWORD
1. Select the password you want to delete.
2. Delete the asterisks (*) in both the Enter New Password and Verify New Password
fields.
If you forget the Administrator password, contact your authorized service
representative to reinstall Fiery X3e system software. This clears the Administrator
password and allows you to set a new one.
Clearing the Fiery X3e
The Clear Server command allows you to clear all queued print jobs from the
Fiery X3e—jobs in the Fiery X3e Print, Hold, and Printed queues. Jobs can also be
deleted, either individually or as a group, using the job management tools. Clear Server
also clears all jobs archived on the Fiery X3e hard disk, the index of archived jobs, and
finally, all Fiery FreeForm masters and the index of Fiery FreeForm masters.
To clear the Fiery X3e, scroll through the Setup menu and choose Clear Server. You
are asked to confirm your selection. If the Administrator password has been set, you
are prompted to enter it.