5
5-31 Printer Setup options
PS (PostScript) Setup
The options in the PS Setup menu in local Setup are located on the Paper Setup tab in
remote Setup.
In the following illustrations, "Device name" represents the model of the copier
N
:
OTE
connected to the Fiery X3e, which is 31C-M.
—Specify whether to convert paper sizes automatically to the
Convert Paper Sizes
default paper sizes specified. For example, if you select Letter/11
x
17->A4/A3, a letter
size job is automatically printed on A4 paper.
—Specify whether to print color (CMYK) or Grayscale images to the
Color Mode
Fiery X3e by default. CMYK gives you full color prints. Select CMYK as the Color
Mode before performing calibration on the Fiery X3e. Grayscale converts all colors to
shades of gray.