EFI KM-C1530 Configuration Manual page 69

4
4-15 Network Setup options
IPX/SPX Setup options
To specify the frame types the Fiery X3e uses for IPX/SPX protocols, choose
IPX/SPX Setup from the Protocol Setup menu. You must choose at least one frame
type to enable IPX/SPX protocols. The Fiery X3e supports the following frame
types for IPX/SPX:
• For Ethernet—Ethernet 802.2, Ethernet 802.3, Ethernet II, and Ethernet SNAP
For protocols other than IPX/SPX, the frame type is automatically enabled and does
not require setup, as follows:
With this protocol
AppleTalk
TCP/IP with Ethernet
And these printing services
PAP (Printer Access Protocol)
LPD (Line Printer Daemon)
This frame type is
automatically enabled
Ethernet SNAP
Ethernet II