EFI KM-C1530 Configuration Manual page 76

4
4-22 Performing Setup from the Control Panel
Network Setup
Service Setup
PServer Setup
Bindery Setup options
Bindery Setup
Use Bindery Setup if you have already configured one or more bindery servers (file
servers running NetWare in bindery emulation) with a Print Server and a Print Queue
for Fiery X3e jobs. Before entering bindery settings, be sure the Fiery X3e is connected
to the network and the NetWare file server is running. If Guest Login is not
supported, you need a valid user name and password.
The terms NetWare server, Novell server, and IPX file server are in common use
N :
OTE
and are used here interchangeably to mean the server on an IPX network running
Novell NetWare networking software.
Bindery Setup menu
Because you can set up more than one Novell server to handle Fiery X3e print jobs, an
additional menu is displayed for this purpose. The options are:
• Add File Server—creates a new file server connection to the Fiery X3e. You can set
up a maximum of eight file server connections. After you have finished adding a new
server, you return to the Bindery Setup menu, where you can set up another server.
• View Server List—displays the list of file servers that have already been selected to
communicate with the Fiery X3e.
• Edit Connection—lets you change the NetWare Print Server that will print to the
Fiery X3e.
• Remove File Server—lets you disconnect the Fiery X3e from a file server to which it
is currently connected. Remove a file server when you want to reduce the number of
connections to the Fiery X3e or reassign the connection to a different NetWare file
server.
• Exit Bindery Setup—lets you exit this menu after you have added all servers, viewed
a list of file servers, or removed a file server from the list.
If you change your mind about any of the menus you have selected, use the
N :
OTE
Menu button to escape and return to the main Bindery Setup menu. To cancel all
changes, exit Network Setup and select No to Save Changes.