General Setup Options - EFI KM-C1530 Configuration Manual

5

5-3 General Setup options

General Setup options
You can specify Fiery X3e system settings that affect all users, such as the name of the
Fiery X3e, system date and time, passwords, and Job Log printing.
—Specify a name for the Fiery X3e. This is the name that appears in the
Server Name
Chooser on an AppleTalk network.
Do not use the device name (31C-M) as the server name. If you have more than
N :
OTE
one Fiery X3e, do not assign them the same name. Windows NT 4.0 does not support
more than one computer with the same name in the same workgroup or domain.
—Specify the system date and time, which are recorded on the Job Log.
Date and Time
—Specify whether to enable the Printed queue, a storage location
Enable Printed Queue
on the Fiery X3e disk for recently printed jobs. You can reprint jobs from the Printed
queue without resending them to the Fiery X3e. If the Printed queue is not enabled,
jobs are deleted from the Fiery X3e disk immediately after they are printed.