EFI KM-C1530 Configuration Manual page 39

2
2-15 Fiery X3e on a NetWare 5.x network with NDPS
Setting up the Fiery X3e on a NetWare 5.x network
Depending on the security needs at your organization, you can set up the Fiery X3e
as a Public Access printer or a Controlled Access printer. The following procedure
describes setting up a Public Access printer. You can then convert the printer to
Controlled Access if necessary. For more information, see your NetWare
documentation.
T F X3
O SET UP THE IERY E AS A
1. In NetWare Administrator, double-click the NDPS Manager object you created.
2. In the Details window for the NDPS Manager object, click Printer Agent List.
The list of Printer Agents appears.
3. Click New.
4. In the Printer Agent (PA) Name field, type a name.
5. Under Gateway Types, select Novell Printer Gateway, and click OK.
6. In the Configure Novell PDS for Printer Agent dialog box, select "((NONE))", and
click OK.
7. In the Configure Port Handler dialog box, choose "Remote LPR on IP" as the
connection type, and click Next.
8. For Host Address, enter the IP address of the Fiery X3e.
P A
UBLIC CCESS PRINTER