Managing Configuration Scripts (Sftp) - Dell Networking N4000 Series Configuration Manual

Managing Configuration Scripts (SFTP)

Beginning in Privileged EXEC mode, use the following commands to
download a configuration script from a remote system to the switch, validate
the script, and activate it.
NOTE:
The startup-config and backup-config files are essentially configuration
scripts and can be validated and applied by using the commands in this section.
Command
user
copy sftp://
address hostname
|
file-name
script
/
name
Password entry
script validate
name
script list
script-
script activate
name
script-name
script show
380
Managing Images and Files
Purpose
ip-
@{
Downloads the specified script from the remote server to
path
}/ the switch.
dest-
After you enter the copy command, the CLI prompts you
for the password associated with the username.
script-
Checks the specified script for syntax errors.
The script is automatically validated when you download it
to the switch. You can validate again with this command.
View the list of available scripts.
Executes the commands within the script in order. The
configuration changes in the script are applied to the
running configuration.
View the contents of the specified script.