Rebooting Your System; Managing Remote Console Switch Configuration Files - Dell PowerEdge KVM 1081AD User Manual

Rebooting Your System

You can reboot the Remote Console Switch through the Tools tab in the on-
board web interface. When clicked, Reboot Remote Console Switch will
broadcast a disconnect message to any active users, then log out the current
user and immediately reboot the Remote Console Switch.
To reboot your system:
1 Click the Tools tab in the on-board web interface. The Tools window
appears.
2 Click the Reboot button. A message prompting you to confirm this reboot
appears.
3 Click OK to reboot.
-or-
Click Cancel to cancel the reboot.
Managing Remote Console Switch Configuration
Files
Configuration files contain all of the settings for a Remote Console Switch.
This includes appliance settings, SNMP settings, LDAP settings, and NTP
settings. You may save your configuration file and, should you ever need to
replace your Remote Console Switch, you can restore the configuration file to
the new switch and avoid manually configuring it.
NOTE:
User account information is stored in the user database, not in the
configuration file. For more information, see "Managing User Databases" on
page 126.
To read and save a configuration file from a Remote Console Switch:
1 Click the Tools tab in the on-board web interface. The Tools window
appears.
2 Click the Save Remote Console Switch Configuration button. The Save
Remote Console Switch Configuration window appears.
3 (Optional) Enter a password in the Password field, then repeat the
password in the Verify Password field. This password is requested when
you restore this database to a Remote Console Switch. Click OK.
Managing Your Remote Console Switch Using the On-board Web Interface
125