Verifying Interoperating Status - Cisco nexus 5000 series Cli Configuration Manual

Switch Interoperability
S e n d f e e d b a c k t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
Change the Fibre Channel timers (if they have been changed from the system defaults).
Step 3
Note
switch(config)# fctimer e_d_tov ?
<1000-100000>
switch(config)# fctimer r_a_tov ?
<5000-100000>
When making changes to the domain, you may or may not need to restart the domain manager function
Step 4
for the altered VSAN.
•
•

Verifying Interoperating Status

This section highlights the commands used to verify if the fabric is up and running in interoperability
mode.
To verify the resulting status of entering the interoperability command in any switch in the Cisco Nexus
5000 Series, perform this task:
Verify the software version.
Step 1
switch# show version
Cisco Storage Area Networking Operating System (SAN-OS) Software
TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2007, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained herein are owned by
other third parties and are used and distributed under license.
Some parts of this software may be covered under the GNU Public
License or the GNU Lesser General Public License. A copy of
each such license is available at
http://www.gnu.org/licenses/gpl.html and
http://www.gnu.org/licenses/lgpl.html
Software
BIOS:
kickstart: version 4.0(0) [build 4.0(0.308)] [gdb]
system:
BIOS compile time:
kickstart image file is: bootflash:///nuova-or-kickstart-nsg.0.1.0.001.bin
kickstart compile time:
system image file is:
system compile time:
Cisco Nexus 5000 Series Switch CLI Software Configuration Guide
1-12
The Cisco Nexus 5000 Series, Brocade, and McData FC Error Detect (ED_TOV) and Resource
Allocation (RA_TOV) timers default to the same values. They can be changed if needed. The
RA_TOV default is 10 seconds, and the ED_TOV default is 2 seconds. Per the FC-SW2 standard,
these values must be the same on each switch within the fabric.
E_D_TOV in milliseconds(1000-100000)
R_A_TOV in milliseconds(5000-100000)
Force a fabric reconfiguration with the disruptive option.
switch(config)# fcdomain restart disruptive vsan 1
or
Do not force a fabric reconfiguration.
switch(config# fcdomain restart vsan 1
version
version 4.0(0) [build 4.0(0.308)] [gdb]
Chapter 1
10/12/2020 25:00:00 [02/22/2008 13:05:46]
bootflash:/nuova-or-system-nsg.0.1.0.001.bin
10/22/2007 14:00:00 [02/22/2008 14:19:45]
Advanced Fibre Channel Features and Concepts
OL-16597-01