config.switch.raTOV
Syntax
raTOV timeoutValue
Purpose
This command sets the R_A_TOV for the Switch.
Description
The Switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its relationship with
E_D_TOV.
Parameters
This command has one parameter:
timeoutValue Specifies the new R_A_TOV value.
Command Example
Root> config switch raTOV 20
CLI reference guide for directors and edge switches
The units for this value are tenths of a second.
This parameter must be an integer in the range 10–1200
(1 second to 120 seconds), and must be larger than the
E_D_TOV.
CLI Commands
2–53