config.features.show
Syntax
show
Purpose
This command shows the product feature information configured for this Switch.
Parameters
This command has no parameters.
Command Example
Root> config features show
Output
The product feature data is displayed as a table that includes the following properties.
Installed
Feature Set
Feature
State
Output Example
The output from the config.features.show command displays as follows.
CLI reference guide for directors and edge switches
The feature set installed using a feature key. Only
installed keys are displayed.
Individual features within each set. In many cases,
there is only one feature within each feature set.
The state of the individual feature. Fabric-wide
features are displayed as Active/Inactive.
Switch-centric features are displayed as
Enabled/Disabled.
CLI Commands
2–7