Show.port.config - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

CLI Commands

show.port.config

Syntax
config
Purpose
This command shows the port configuration for all ports.
Parameters
This command has no parameters.
Command Example
Root> show port config
Output
The port configuration attributes are displayed as a table that includes the following
properties:
Port
Name
Blocked
Ext Dist
FAN
Type
Speed
2–114
The port number.
The name of the port as set in the config.port.name
command.
The blocked state of the port as set in the
config.port.blocked command.
The extended distance state as set in the
config.port.extDist command. (This does not apply
to the Edge Switch 2/24.)
The configured fabric address notification (FAN) state. (Edge
Switch 2/24 only.)
The port type as set in the config.port.type command.
The port speed as set in the config.port.speed
command.
CLI reference guide for directors and edge switches