CLI Commands
config.zoning.renameZoneSet
Syntax
renameZoneSet "zoneSetName"
Purpose
This command changes the name of the zone set in the work area.
Description
Changes are not activated on the Switch until the
config.zoning.activateZoneSet command is issued.
Parameters
This command has one parameter:
zoneSetName Specifies the new name for the zone set.
Command Example
Root> config zoning renameZoneSet TheUltimateZoneSet
2–72
The zoneSetName must contain 1–64 characters.
Valid characters are:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrs
tuvwxyz0123456789$-^_
Spaces are not permitted, and the first character must be
alphabetical.
CLI reference guide for directors and edge switches