CLI Commands
2–122
If the operational state is Invalid Attachment only the
following messages can be generated:
•
08 None
•
09 Unknown
•
10 ISL connection not allowed on this port
•
11 ELP rejected by the attached Switch
•
12 Incompatible Switch at other end of the ISL
•
13 External loopback adapter connected to the port
•
14 N_Port connection not allowed on this port
•
15 Non-HP switch at other end of the ISL
•
16 ISL connection not allowed on this port
•
17 ISL connection not allowed to external Fabrics
•
18 Port binding violation—unauthorized WWN
•
19 Unresponsive node connected to port
•
20 Incompatible security attributes
•
21 Fabric Binding violation
•
22 Authorization failure
•
23 Switch Binding violation
If the operational state is Inactive only the following messages
can be generated:
•
24 Inactive – RC 0
•
25 No Serial Number
•
26 Feature Not Enabled
CLI reference guide for directors and edge switches