HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual page 178

Error Messages
Message
Error 119: Switch
Speed Not 2 Gb/sec
Error 134: Invalid
Membership List
Error 135: Invalid
Number of Fabric
Membership List
Entries
Error 136: Invalid
Number of Switch
Membership List
Entries
Error 137: Invalid Fabric
Binding State
A–14
Description
This request cannot be
completed because the
Switch speed has no been
set to 2 Gbps.
Generic message to
indicate a problem in either
the Switch binding or fabric
binding membership list
The number of fabric
members submitted
exceeds the maximum
allowable entries of 31.
The number of Switch
members submitted
exceeds the maximum
allowable entries of 256.
The fabric binding state
submitted is not recognized
by the CLI.
CLI reference guide for directors and edge switches
Action
The Switch speed must
be set to 2 Gbps in order
to accommodate a port
speed of 2 Gbps. Update
the Switch speed and
resubmit the request.
Be sure that the
membership list
submitted does not
isolate a Switch already
in the fabric. If this is not
the case, the user needs
to be aware of all fabric
security rules and make
sure that the list
submitted adheres
appropriately.
The number of entries in
the fabric membership
list is limited to the total
number of domain ID's
available to the fabric.
Make sure that the list
(including the managed
Switch) contains no more
than 31 entries.
The number of entries in
the Switch membership
list is limited to 256.
Make sure that the list
(including the managed
Switch) contains no more
than 256 entries.
The fabric binding state
must be set to either
inactive or restrict. For
more information, see
config.security.fabricBin
ding on page 2-22
.