CLI Commands
show.security.fabricBinding
Syntax
fabricBinding
Purpose
This command displays the fabric binding configuration saved on the fabric. The
command performs the same function as
config.security.fabricBinding.showActive command.
Parameters
This command has no parameters.
Command Example
Root> show security fabricBinding
Output
The fabric binding configuration data is displayed as a table that includes the
following properties:
Fabric Binding State
Fabric Membership List The active fabric membership list.
Output Example
The output from the show.security.fabricBinding command displays as
follows:
Fabric Binding State:
Domain 1
Domain 2
Domain 14 (11:55:35:45:24:78:98:FA)
2–126
The active fabric binding state: Inactive or
Active Restricting
Active Restricting
(00:11:22:33:44:55:66:77)
(88:99:AA:BB:CC:DD:EE:FF)
CLI reference guide for directors and edge switches