CLI Commands
config.zoning.deleteWwnmem
Syntax
deleteWwnMem "zoneName" wwn
Purpose
This command removes a WWN member from a zone that is in the work area.
Parameters
This command has two parameters:
zoneName
wwn
Command Example
Root> config zoning deleteWwnMem TheNotSoUltimateZone
10:00:00:00:C9:22:9B:AB
2–76
Specifies the name of the zone that contains the member to be
deleted.
Specifies the World Wide Name of the member to be deleted
from the zone.
The value of the WWN must be in colon-delimited
hexidecimal notation.
For example: AA:00:AA:00:AA:00:AA:00.
CLI reference guide for directors and edge switches