HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual page 169

Message
Error 31: Invalid Subnet
Mask
Error 32: Invalid SNMP
Community Name
Error 33: Invalid SNMP
Trap Address
CLI reference guide for directors and edge switches
Description
The value entered for the
new subnet mask for the
Ethernet interface is invalid.
The value entered for the
SNMP community name is
invalid.
The value entered for the
SNMP trap address is
invalid.
Error Messages
Action
The subnet mask must
be entered in dotted
decimal format (for
example, 255.0.0.0).
Enter the subnet mask
for the Ethernet interface
in dotted decimal format.
The SNMP community
name is the name of the
community specified in
the
config.snmp.addCom
munity command. The
community name must
not exceed 32
characters. Valid
characters include all
those in the ISO Latin-1
character set. Duplicate
community names are
allowed, but the
corresponding
writeAuthorization values
must match. Enter an
SNMP community name
that meets all of the
requirements.
The new SNMP trap
address for the SNMP
interface must be
entered in dotted decimal
format (for example,
10.0.0.0). Enter an
SNMP trap address that
meets the requirements.
A–5