Config.port.blocked - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

config.port.blocked

Syntax
blocked portNumber blockedState
Purpose
This command sets the blocked state for a port.
Parameters
This command has two required parameters:
portNumber
blockedState
Command Examples
Root> config port blocked 4 false
Root> config port blocked 4 0
CLI reference guide for directors and edge switches
Specifies the port number. Valid values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–144 for the Director 2/140
Specifies the blocked state for the port. Valid
values are true and false.
Boolean 1 and 0 may be substituted as values.
CLI Commands
2–13