Config.security.fabricbinding.showactive; Config.security.fabricbinding.showpending - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

CLI Commands

config.security.fabricBinding.showActive

Syntax
showActive
Purpose
This command displays the fabric binding configuration saved on the fabric. It
performs the same function as show.security.fabricBinding.
Parameters
This command has no parameters:
Output
This command displays the following fabric binding configuration data:
Fabric Binding State
Fabric Membership List
Output Example
The output from the config.security.fabricBinding.showActive
command displays as follows:
Fabric Binding State:
Domain 1
Domain 2
Domain 14 (11:55:35:45:24:78:98:FA)

config.security.fabricBinding.showPending

Syntax
showPending
Purpose
This command displays the fabric binding configuration in the pending working area
and has not yet been activated to the fabric. If no changes have been made to the
pending environment, the CLI displays the Active membership list.
2–26
The active fabric binding state: Inactive or
Active Restricting
The active fabric membership list.
Active Restricting
(00:11:22:33:44:55:66:77
(88:99:AA:BB:CC:DD:EE:FF)
CLI reference guide for directors and edge switches