Config.switch.edtov - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

CLI Commands

config.switch.edTOV

Syntax
edTOV timeoutValue
Purpose
This command sets the E_D_TOV for the Switch.
Description
The Switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its relationship with
R_A_TOV.
Parameters
This command has one parameter:
timeoutValue
Command Example
Root> config switch edTOV 4
2–48
Specifies the new E_D_TOV value.
The units for this value are tenths of a second.
This parameter must be an integer in the range 2–600
(0.2 second to 60 seconds), and it must be smaller than the
R_A_TOV.
CLI reference guide for directors and edge switches