CLI Commands
config.features.ficonms
Syntax
ficonms ficonmsState
Purpose
This command sets the enabled state of the FICON Management Server. The FICON
Management Server feature key must be installed in order to enable the FICON
Management Server State. (The Edge Switch 2/24 does not accept this command.)
Parameters
This command has one parameter:
ficonmsState
Command Example
Root> config features ficonms 1
2–4
Specifies whether the FICON Management
Server is enabled. Valid values are enable and
disable. Boolean 1 and 0 may be substituted as
values.
CLI reference guide for directors and edge switches