Show.features - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

CLI Commands

show.features

Syntax
features
Purpose
This command displays a table of all installed feature sets and their states. The output
is exactly the same as the output to the config.features.show command.
Parameters
This command has no parameters.
Command Example
Root> show features
Output
The features data is displayed as a table that includes the following properties:
Installed Feature
Set
Feature
State
Output Example
The output from the show.features command displays as follows:
Installed Feature Set
------------------------------
Open Systems Management Server
Flex Ports
SANtegrity
SANtegrity
SANtegrity
2–104
The feature set installed using a feature key. Only
installed keys are displayed.
Individual features within each set. In many cases, there
is only one feature within each feature set.
The state of the individual feature. Fabric-wide features
are displayed as Active/Inactive. Switch-centric
features are displayed as Enabled/Disabled.
Feature
-----------------
OSMS
8 Flex Ports
Fabric Binding
Switch Binding
Enterprise Fabrics
CLI reference guide for directors and edge switches
State
----
Enabled
Enabled
Active
Enabled
Active