Config.ip.ethernet - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

config.ip.ethernet

Syntax
ethernet ipAddress gatewayAddress subnetMask
Purpose
This command sets the Ethernet network settings.
Description
The Telnet connection can be lost when these Ethernet network settings are changed.
If the IP address is reconfigured, your Telnet client must be reconnected to the new IP
address. A new login will be requested.
Parameters
This command has three parameters:
ipAddress
gatewayAddress
subnetMask
Command Example
Root> config ip ethernet 10.0.0.0 0.0.0.0 255.0.0.0
CLI reference guide for directors and edge switches
Specifies the new IP address for the Director or
Edge Switch. The address must be entered in
dotted decimal format (for example, 10.0.0.0).
Specifies the new gateway address for the
Ethernet interface. The address must be entered in
dotted decimal format (for example, 0.0.0.0).
Specifies the new subnet mask for the Ethernet
interface. The address must be entered in dotted
decimal format (for example, 255.0.0.0).
CLI Commands
2–9