config.zoning.deletePortMem
Syntax
deletePortMem "zoneName" domainId portNumber
Purpose
This command deletes a domain ID and port number for a zone member in the
specified zone in the work area.
Parameters
This command has three parameters:
zoneName
domainId
portNumber
Command Example
Root> config zoning deletePortMem TheUltimateZone 10 5
CLI reference guide for directors and edge switches
Specifies the name of the zone that contains the member to be
deleted.
Specifies the domain ID of the member that to be deleted
from the zone.
Valid domain IDs are in the range 1–31.
Specifies the port number of the member to be deleted from
the zone.
Valid port numbers values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–144 for the Director 2/140
CLI Commands
2–77