CLI Commands
show.system
Syntax
system
Purpose
This command displays a set of system attributes.
Parameters
This command has no parameters.
Command Example
Root> show system
Output
The system attributes are displayed as a table that includes the following properties:
Name
Description
Contact
Location
Date/Time
Serial NumberThe serial number for the system.
Type Number
Model Number The model number for the system (for example,
EC Level
2–132
The system name as set in the config.system.name
command.
The system description as set in the
config.system.description command.
The system contact as set in the
config.system.contact command.
The system description as set in the
config.system.description command.
The system date and time as set in the
config.system.date command.
The type number for the system.
Director 2/64).
The engineering change level installed.
CLI reference guide for directors and edge switches
Need help?
Do you have a question about the 316095-B21 - StorageWorks Edge Switch 2/24 and is the answer not in the manual?