Config.zoning.showpending - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

config.zoning.showPending

Syntax
showPending
Purpose
This command shows the zoning configuration in the work area of the zone set that
has not yet been activated.
Parameters
This command has no parameters.
Command Example
Root> config zoning showPending
Output
The zoning configuration data is displayed as a table that includes the following
properties.
Local ZoneSet
Output Example
The output from the config.zoning.showPending command displays as
follows.
Pending Zone Set
Default Zone Enabled:
ZoneSet:
Zone:
Zone:
Zone:
CLI reference guide for directors and edge switches
The enabled status, name, and member zones of the zone
set.
False
TheNewUltimateZoneSet
TheNewUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
TheNewNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
TheNewNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
CLI Commands
2–79