CLI Commands
show.zoning
Syntax
zoning
Purpose
This command shows the zoning configuration saved on the fabric.
Parameters
This command has no parameters.
Command Example
Root> show zoning
Output
The zoning configuration data is displayed as a table that includes the following
properties:
Active
ZoneSet
Output Example
The output from the show.zoning command displays as follows.
Active Zone Set
Default Zone Enabled:
ZoneSet:
Zone:
Zone:
Zone:
2–134
The enabled status, name, and member zones of
the zone set.
False
TheUltimateZoneSet
TheUltimateZone
ZoneMember: Domain 10, Port 6
ZoneMember: Domain 15, Port 2
ZoneMember: Domain 2, Port 63
ZoneMember: 10:00:00:00:C9:22:9B:64
ZoneMember: 10:00:00:00:C9:22:9B:BD
TheNotSoUltimateZone
ZoneMember: 10:00:00:00:C9:22:9B:AB
ZoneMember: 10:00:00:00:C9:22:9B:C6
ZoneMember: 10:00:00:00:C9:22:9B:AB
TheNotUltimateAtAllZone
ZoneMember: Domain 2, Port 63
CLI reference guide for directors and edge switches