config.features.enterpriseFabMode
Syntax
enterpriseFabMode enterpriseFabModeState
Purpose
This command sets the Enterprise Fabric mode state for the fabric. The SANtegrity
feature key must be installed to activate the Enterprise Fabric mode state.
Parameters
This command has one parameter:
enterpriseFabModeState
Command Example
Root> config features enterpriseFabMode 1
CLI reference guide for directors and edge switches
Specifies whether enterpriseFabMode is
active. Valid values are activate and
deactivate. Boolean 1 and 0 may be
substituted as values.
CLI Commands
2–3