Show.security.switchbinding - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

show.security.switchBinding

Syntax
switchBinding
Purpose
This command displays the Switch binding configuration.
Parameters
This command has no parameters.
Command Example
Root> show security switchBinding
Output
The Switch binding configuration data is displayed as a table that includes the
following properties:
Switch Binding State
Switch Membership List The active Switch membership list.
Output Example
The output from the show.security.switchBinding command displays as
follows:
CLI reference guide for directors and edge switches
Disabled, Enabled and Restricting
F_Ports,
Enabled and Restricting E_Ports, or
Enabled and Restricting All Ports
CLI Commands
2–129