perf.traffic
Syntax
traffic portNumber
Purpose
This command displays port traffic counters for a single port.
Parameters
This command has one parameter:
portNumber
Command Example
Root> perf traffic 2
Output
The port traffic counter data is displayed as a table that includes the following
statistics, along with a wrap count for each corresponding counter.
Port
Rx%
Tx%
RxFrames
TxFrames
CLI reference guide for directors and edge switches
Specifies the port number.
Valid values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–144 for the Director 2/140
The port number.
The received link utilization percentage.
The transmitted link utilization percentage.
The number of Fibre Channel Class 2 and Class 3 frames that the
port has received.
The number of Fibre Channel Class 2 and Class 3 frames that the
port has transmitted.
CLI Commands
2–99