Config.security.userrights.operator - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

config.security.userRights.operator

Syntax
operator "username" "password"
Purpose
This command sets the name and password for operator-level access.
Parameters
This command has two parameters:
username
password
Command Example
Root> config security userRights operator "Operator" "newpassword"
CLI reference guide for directors and edge switches
Specifies the new user name for operator-level login.
Default is Operator.
This parameter is 1–15 characters.
Valid characters include all characters in the USASCII
character set, excluding control characters and spaces.
Spaces are not valid even though quotation marks are used.
Specifies the password for operator-level login.
Default is password.
This parameter is 1–15 characters.
Valid characters include all characters in the USASCII
character set, excluding control characters and spaces.
Spaces are not valid even though quotation marks are used.
CLI Commands
2–37