Config.port.show - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

CLI Commands

config.port.show

Syntax
show portNumber
Purpose
This command displays the port configuration for a single port.
Description
This show command, on the config.port branch, displays the current configuration for
the specified port.
Parameters
This command has one parameter:
portNumber
Command Example
Root> config port show 4
Output
The port configuration is displayed as a table that includes the following properties.
Port Number
Name
Blocked
2–20
Specifies the port number. Valid values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–144 for the Director 2/140
The port number.
The port name.
The blocked state.
Valid values are true and false.
CLI reference guide for directors and edge switches