CLI Commands
perf.class3
Syntax
class3 portNumber
Purpose
This command displays port Class 3 counters for a single ports.
Parameters
This command has one parameter:
portNumber
Command Example
Root> perf class3 2
Output
The port Class 3 counter data is displayed as a table that includes the following
statistics, along with a wrap count for each corresponding counter.
Port
RxFrames The number of Fibre Channel Class 3 frames that the port has received.
TxFrames The number of Fibre Channel Class 3 frames that the port has
RxWords The number of Class 3 4-byte words within frames that the port has
2–92
Specifies the port number.
Valid values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–144 for the Director 2/140
The port number.
transmitted.
received.
CLI reference guide for directors and edge switches