Show.port.nodes - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

CLI Commands

show.port.nodes

Syntax
nodes portNumber
Purpose
This command displays the loop node list for a specified port. This command is valid
only on the Edge Switch 2/24.
Parameters
This command has one parameter.
portNumber
Command Example
Root> show port nodes portNumber
Output
The port data is displayed as a table that includes the following properties:
PC Addr
Attached WWN The WWN of nodes attached to this port, or the string NOT
Class
Data Field
Size
2–118
Specifies the port number.
Valid values are:
0–23 for the Edge Switch 2/24
The Fibre Channel address of nodes attached to this port.
Private devices are assigned address strings of 0000 followed
by the two-digit hexadecimal Arbitrated Loop Physical
Address (ALPA), instead of the 6-digit hexadecimal number
presented for public devices.
LOGGED IN for a private loop device.
The Class value for public devices. This field is left blank for
private devices.
The Data Field Size value for public devices. This field is left
blank for private devices.
CLI reference guide for directors and edge switches