Commadelim - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

commaDelim

NOTE: The output examples shown in the other sections of this publication presume that
commaDelim is off.
Syntax
commaDelim enable
Purpose
This command enables the user to obtain displayed information (from a show
command) in comma-delimited, rather than tabular, format. The default format is
tabular.
Description
This command can be entered at any point in the command tree.
Parameter
This command has one parameter:
enable
Specifies the comma-delineated state for output. Valid values are true and false.
Boolean 1 and 0 may be substituted as values.
Command Examples
Root> commaDelim true
Config> commaDelim 1
Config.Port> commaDelim false
Output Example
Output displayed in commaDelim mode follows.
Root> show eventLog
Date/Time,Code,Severity,FRU,Event Data,
04/12/01 10:58A,375,Major,CTP-0,00010203 04050607 08090A0B
0C0D0E0F,
04/12/01 10:58A,375,Major,CTP-0,00010203 04050607 08090A0B
0C0D0E0F,
04/12/01 9:58A,385,Severe,CTP-0,00010203 04050607 08090A0B
0C0D0E0F,
04/11/01 7:18P,395,Severe,CTP-0,00010203 04050607 08090A0B
0C0D0E0F,
CLI reference guide for directors and edge switches
Introduction
1–13