CLI Commands
config.port.extDist
Syntax
extDist portNumber extDistOn
Purpose
This command sets the extended distance state for a port. (The Edge Switch 2/24 does
not accept this command.
Description
When the extended distance field is true, the port is configured for 60 buffer credits,
which supports a distance of up to 100 km for a 1 gigabits per second (Gbps) port.
Parameters
This command has two required parameters:
portNumber
extDistOn
Command Examples
Root> config port extDist 4 false
Root> config port extDist 4 0
2–14
Specifies the port number. Valid values are:
0–5 for the Edge Switch 2/16
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–144 for the Director 2/140
Specifies the extended distance state for the port.
Valid values are true and false.
Boolean 1 and 0 may be substituted as values.
CLI reference guide for directors and edge switches