Parameters
This command has one parameter:
wwn
Command Examples
Root> config security switchBinding deleteMember
AA:99:23:23:08:14:88:C1
config.security.switchBinding.setState
Syntax
setState switchBindingState
Purpose
This command removes a member from the Switch Member List. The user cannot
remove a member that is currently logged into the Switch.
CLI reference guide for directors and edge switches
Specifies the Switch or N-Port device WWN of the
member to be removed from the Switch membership list.
The value of the WWN must be in colon-delimited
hexadecimal notation (for example,
AA:00:AA:00:AA:00:AA:00). The user may also enter
all for this argument to clear the Switch membership list
completely. Note that the user cannot clear a WWN that
is currently logged into the Switch.
CLI Commands
2–33