HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual page 177

Message
Error 101: Command
Not Supported on This
Product
Error 102: Switch Not
Operational
Error 115: Invalid
Switch Speed
Error 116: Switch Not
Capable of 2 Gbps
Error 117: Ports Cannot
be Set at Higher Data
Rate than Switch
Speed
Error 118: Invalid Port
Speed
CLI reference guide for directors and edge switches
Description
This product does not
support the specified
command.
The request cannot be
completed because the
Switch is not operational.
The request cannot be
completed because the
Switch is not capable of
operating at the configured
speed.
The request cannot be
completed because the
Switch is not capable of
operating at 2.125 gigabits
per second (Gbps).
The request cannot be
completed because the
requested port speed is
faster than the configured
Switch speed.
This request cannot be
completed because the
requested port speed is not
recognized for this product.
Error Messages
Action
Information only
message: this operation
is not supported.
Refer to the product
service manual, and
consult your service
representative.
Refer to the product
service manual to
determine the speed
capabilities of the
product.
Refer to the product
service manual to
determine the speed
capabilities of the
product.
The Switch speed should
first be configured to
accommodate changes
in the configured port
speed. The ports cannot
operate at a faster rate
than the Switch itself.
Update the Switch speed
and resubmit the
request. For more
information about setting
speeds, see
config.switch.speed on
page 2-55
and
config.port.speed on
page 2-17
.
Port speeds may be set
to 1 Gbps or 2 Gbps.
Update the port speed
and resubmit the
request.
A–13