CLI Commands
perf.class2
Syntax
class2 portNumber
Purpose
This command displays port Class 2 counters for a single port.
Parameters
This command has one parameter:
portNumber
Command Example
Root> perf class2 2
Output
The port Class 2 counter data is displayed as a table that includes the following
statistics, along with a wrap count for each corresponding counter.
Port
RxFrames
TxFrames
RxWords
2–90
Specifies the port number.
Valid values are:
0–15 for the Edge Switch 2/16
0–23 for the Edge Switch 2/24
0–31 for the Edge Switch 2/32
0–63 for the Director 2/64
0–127 and 132–144 for the Director 2/140
The port number.
The number of Fibre Channel Class 2 frames that the port has
received.
The number of Fibre Channel Class 2 frames that the port has
transmitted.
The number of Class 2 4-byte words within frames that the port has
received.
CLI reference guide for directors and edge switches