Config.switch.interopmode - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual
Cli reference guide for directors and edge switches
Hide thumbs
Also See for 316095-B21 - StorageWorks Edge Switch 2/24:
- Service manual (322 pages) ,
- User manual (300 pages) ,
- Planning manual (206 pages)
Table of Contents
Advertisement
config.switch.interopMode
Syntax
interopMode interopMode
Purpose
This command sets the interoperability mode for the Switch. The Switch must be
offline to complete this command.
Description
The Switch must be set offline before this command is entered.
Parameters
This command has one parameter:
interopMode
Command Example
Root> config switch interopMode open
CLI reference guide for directors and edge switches
Specifies the interoperability mode.
Valid values are:
•
mcdata (for Homogenous Fabric mode)
•
open (for Open Fabric 1.0 mode)
CLI Commands
2–49
Advertisement
Table of Contents
