Config.security.fabricbinding.setstate - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

Parameters
This command has no parameters:
Command Examples
Root> config security fabricBinding replacePending

config.security.fabricBinding.setState

Syntax
setState fabricBindingState
Purpose
This command sets the fabric binding state for the pending fabric binding
configuration work area.
NOTE: This state is not saved to the fabric until the activatePending command is issued.
Parameters
This command has one parameter:
fabricBindingState
Command Examples
Root> config security fabricBinding setstate restrict
CLI reference guide for directors and edge switches
Specifies the fabric binding state for the pending fabric
binding configuration work area. Valid values are:
inactive — Deactivates fabric binding. Switches
and Directors are allowed to join the fabric without
restriction. The fabric membership list is empty in this
state, and as such, the fabric membership list is cleared
when this state is requested.
restrict — Activates fabric binding and restricts
connections. Only Switches identified in the fabric
membership list may join the fabric in this state. The
fabric membership list is automatically populated with
devices attached prior to activation, but all new
members must be manually added before connecting.
The Switch must be online to complete this request.
CLI Commands
2–25