HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual page 174

Error Messages
Message
Error 73: Port Not
Installed
Error 74: Invalid
Number of Zones
Error 75: Invalid Zone
Set Size
Error 76: Invalid
Number of Unique
Zone Members
Error 77: Not Allowed
While Port Is Failed
Error 78: System Error
Light On
Error 79: FRU Failed
A–10
Description
The specified port is not
installed on the product.
The specified zone set
contains less than one zone
or more than the maximum
number of zones allowed for
this product.
The specified zone set
exceeds the NV-RAM
limitations of the Director or
Edge Switch.
The specified zone contains
more than the maximum
number of zone members
allowed per zone set for this
product.
The specified port is in a
failed or inactive state or
requires service.
This product cannot beacon
because the system error
light is on.
The specified FRU has
failed.
CLI reference guide for directors and edge switches
Action
Refer to the product
service manual for
information about
installing a port optic.
The zone set must
contain at least one
zone. Add or remove
zones to stay within the
required number of
zones for this product.
Reduce the size of the
zone set to meet the
NV-RAM limitations of
the product. Reduce the
number of zones in the
zone set, reduce the
number of members in a
zone, or reduce the zone
name lengths.
Reduce the number of
members in the zone
before reentering the
command.
Refer to the product
service manual for the
appropriate action.
Refer to the product
service manual for the
appropriate procedure.
Clear the system error
light before enabling
beaconing.
Refer to the product
service manual for the
appropriate procedure.