Show.nameserverext - HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual

CLI Commands

show.nameServerExt

Syntax
nameServerExt
Purpose
This command displays extended information from the name server database for
devices attached to this Switch. The command provides symbolic nameserver
information, as well as the same information as the show.nameServer command.
Multiple devices per port are possible for any public loop device attached to an FL
Port.
NOTE: Because it contains symbolic nameserver information that can be lengthy, the CLI
output wraps several times per node. For this reason, this command is supported only in
comma-delimited mode.
Parameters
This command has no parameters.
Command Example
Root> show nameServerExt
Output
The device information data is displayed as a table that includes the following
properties:
Type
Port Id
Port Name
Node Name
COS
FC4 Types
2–112
The type (N, NL, F/NL, F, FL, E, B).
The 24-bit Fibre Channel address.
The port World Wide Name of the attached device.
The node World Wide Name of the attached device.
The class of service (for example, 1; 2; 3; 4; 5; 6; F; 1,2; 2,3).
The FC4 types registered for this device. One or more
numbers display in this field. The numbers in this field
correspond to the list in the output example for
show.nameServer on page 2-110.
CLI reference guide for directors and edge switches