HP 316095-B21 - StorageWorks Edge Switch 2/24 Reference Manual page 185

Message
Error 218: Invalid Port
Number
Error 219: Invalid Port
Type
Error 222: Invalid
SNMP Community
Index
Error 223: Unknown
Error
CLI reference guide for directors and edge switches
Description
The value specified for the
port number is invalid.
The value specified for the
port type is invalid.
The value specified for the
SNMP community index is
invalid.
The Switch did not accept
the request.
Error Messages
Action
Enter a port number
within the range
supported by the Director
or Edge Switch. Valid
values are:
• 0–15 for the Edge
Switch 2/16
• 0–23 for the Edge
Switch 2/24
• 0–31 for the Edge
Switch 2/32
• 0–63 for the Director
2/64
• 0–127 and 132–144
for the Director 2/140
A port may be configured
as an E_Port, a G_Port,
or an F_Port. Make sure
the port is configured
appropriately and
resubmit the command.
The Fx_port and Gx_port
types are also supported
on the Edge Switch 2/24.
The SNMP community
index must be an integer
in the range 1–6. Enter
an integer in the range
1–6.
Contact your service
representative.
A–21